Product Information The Dry-Brik contained in the Dry & Store family of products has three important functions: (1) to permanently remove the moisture molecules that are released from the devices during the warm drying cycle; (2) to drive the relative humidity inside the box to a much lower level than is possible with just a heater, thus maximising the drying capability; and (3) to capture odours. Boxes using heat alone lower the relative humidity by warming the air, but the amount of moisture in the air does not change. While warm air can hold more moisture than cool air, unless the water is removed, it can condense right back where it was when the heat goes off. That's where the desiccant comes in. Products without a desiccant might work fine in a desert, but in a humid environment they are simply ineffective. The Dry & Store family of products uses Dry-MaxTM technology: a controlled amount of warm dry air, a soft but continuous flow of air around all of the small ports and openings in an electronic device like a hearing instrument, and the powerful Dry-Brik II desiccant to do the job right!
Important notice: While we work to make sure that product information is correct, manufacturers can change their ingredient lists. Actual product packaging and materials may contain more and/or different information than that shown on our website. We strongly recommend that you always read labels, warnings, and directions before using or consuming a product and that you do not solely rely on the information on our website. If you are not happy with a product and have not used it you may return it at anytime for a full refund.