Electronics and Photonics
Adhesion of moulding compounds. Can material pre-selection increase the reliability of electronic components?
R. Pufall, B. Michel, E. Kaulfersch
Application of YAG Laser Micro-Welding in MEMS Packaging
P. Bozorgi
Backside Nanoscale Texturing to Improve IR Response of Silicon Photodetectors
L. Forbes, M.Y. Louie
Control of Conducting Path in Resistive Memory Utilizing Ferritin Protein with Metal Nano Dot
M. Uenuma, B. Zheng, K. Kawano, M. Horita, S. Yoshii, I. Yamashita, Y. Uraoka
3-state Quantum Dot Gate FETs in Designing High Sampling Rate ADCs
S. Karmakar, J.A. Chandy, F.C. Jain
Comprehensive Examination of Intrinsic-Parameter-Induced Characteristic Fluctuations in 16-nm-Gate CMOS Devices
M-H Han, Y. Li
Neighbouring Levels Statistic and Shape of Quantum Dots: Si/Sio2
I. Filikhin, S.G. Matinyan, B. Vlahovic
Enhancement of Defect Tolerance in the QCA-based Programmable Logic Array (PLA)
T. Notsu, K. Miura, K. Nakamae
Critical currents in graphene ribbon Josephson junctions
P.G. Gabrielli
Atomistic Simulations of Electronic Structure in Realistically-Sized Wurtzite InN/GaN Quantum Dots
K. Yalavarthi, V. Gaddipati, S. Ahmed
Jet-printed Si nanowires for flexible backplane applications
W.S. Wong, S. Raychaudhuri, S. Sambandan, R. Lujan, R.A. Street
Self–Heating Effects in Nanowire Transistors
A. Hossain, K. Raleva, D. Vasileska, S.M. Goodnick
Stable Light Emiting Electrochemical Cells Based in Supramolecular Interactions
R.D. Costa, M. Lenes, E. Ortí, H.J. Bolink, S. Graber, E.C. Constable
Optical properties of silicon nanoparticles: Influence of etching, surface oxidation and surface functionalization
A. Gupta, S. Kluge, C. Schulz, H. Wiggers
Growth and investigations on Fe/MgO/Fe magnetic tunnel junctions fabricated by dual ion beam sputtering technique
B. Singh, P. Gupta, S. Chaudhary, D.K. Pandya, S.C. Kashyap
The Effects of Gamma rays on p-channel MOSFET
M.A. Iqbal, U. Firdous
Characteristic Optimization of Single- and Double-Gate Tunneling Field Effect Transistors
K-F Lee, M-H Han, I-S Lo, C-Y Yiu, Y. Li
Effect of temperature and γ rays radiation on the electrical and optical characteristics of Quantum well structure based laser diode
M.A. Iqbal, S. Ghani
Semiconductor nanoparticles in Photocatalysis: The Emerging Art and Perspectives
A. Sharma, A. Sharma, R. Sharma
An Architecture for Designing Noise-Tolerant QCA Nanocircuits
S.C. Lee, L.R. Hook IV
A New QCA Architecture for the Future of Nano-Scale Computing
L.R. Hook IV, S.C. Lee
A Fan-in Bounded Low Delay Adder for Nanotechnology
Y. Sun, M.D. Wagh
The Effects of Gamma rays on P-channel MOSFET
M.A. Iqbal, U. Firdous
Nanostructured Materials and Devices
Visible Room Temperature Photoluminescence in Wet-Chemically Etched Silicon Nanowires
V.A. Sivakov, F. Voigt, G. Brönstrup, G. Bauer, S.H. Christiansen
Iron based 1D Nanostructures by Electrospinning Process
C. Eid, A. Brioude, V. Salles, J.-C. Plenet, R. Asmar, Y. Monteil, R. Khoury, A. Khoury, P. Miele
Nanopore detection of nerve agent degradation products
X. Guan, J. Gupta, Q. Zhao, R.S. de Zoysa, D.A. Jayawardhana
The Potential of Silicon-Based Ligands in Metal-Organic Frameworks
A. Jumabekov
Characterization of Nanostructured Phenolic and Epoxy Composites Under Pulse Laser Degradation
S. Young, A. Kumar, A. Ludwick, H. Aglan
Novel metal nanoslit by dewetting of thermally activated Au film on CNT
H. Im
MOCVD Preparation and photoluminiscence of ZnS nanowires
J.M. Juarez, F. Juarez
Structural and magnetic Properties of electrochemically grown Co-Fe and Ni-Fe alloy nanowire arrays
D.K. Pandya, D. Kaur, S. Chaudhary, S.C. Kashyap
Crystalline/amorphous silicon core/shell nanowires under external loads: An atomistic simulation study
Q. Meng, Y. Jing
Monte Carlo Simulation of Impact of Random Telegraph Noise in 45 nm MOSFET Due to Coupled Effects of Random Interface and Oxide Traps With Random Channel Dopant Distributions
N.S. Ashraf, D. Vasileska, Z. Ma
Development of Aligned Carbon Nanotubes (CNTs) for Pressure Sensing Application
N.M. Mohamed, M.K. Lai, K.M. Begam
A new technology for making advanced materials
V. Varyukhin, V. Spuskanyuk, O. Davydenko
Development of nanoenergetic materials based on Al/I2O5 system
K.S. Martirosyan, L. Wang, D. Luss
The influence of nanometric size on various properties of nanocrystalline Ti0.95Co0.05O2 diluted magnetic semiconductors
K. Srinivas, P. Venugopal Reddy
Synthesis of porous silicas with high surface area using renewable templates
J.D. Peña, L.A. Rios
Mechanical Properties of Metallized Single Nanofibers
H-R. Kim, N. Kimura, H-S. Bang, B-S. Kim, Y. Watanabe, H-Y. Kim, Y. Enomoto, I-S. Kim
Doping Effects in Optical Properties of Low Temperature Grown ZnO Nanorod Arrays
O. Lupan, I. Tiginyanu, V. Ursaki, L. Chow
Crystal-like growth of metal oxide/CNT composite with electroplated "seed"
W.J. Kim, E.Y. Jang, D.K. Seo, T.J. Kang, K.C. Jin, D.H. Jeong, Y.H. Kim
Micro and Nano Reliability
Advanced Virtual Qualification Methods to Reduce the Time-to-Market of Microelectronic Assemblies
M.H. Shirangi, M. Koyuncu, J. Keller, B. Michel
In-situ MEMS Testing
A. Dommann, A. Neels, A. Schifferle, E. Mazza
A Novel In-situ Force Measurement Method for Real Solder Joints Fatigue Evaluation
M. Roellig, R. Metasch, K. Meier
A Multiscale Modeling Approach for Microelectronic Packaging Applications
N. Iwamoto, O. Hölck, S. Noijen, B. Wunderle, S. Todd
Influence of moisture on humidity sensitive material parameters of microelectonic relevant polymers
H. Walter, E. Dermitzaki, B. Wunderle, B. Michel
Advanced In- and Out-off plane High Resolution X-ray Strain Analysis on MEMS
A. Neels, A. Dommann
Networking in Micro/Nano Reliability Research Encouraged by EUCEMAN, the European Center for Micro- and Nanoreliability
B. Michel, J. Hammacher, T. Winkler, E. Kaulfersch
NanoFab: Manufacture, Instrumentation
Hierarchically Branched Gecko Tapes Imprinted Using Porous Alumina Templates
A.H.Y. Yee, I. Rodríguez, Y.C. Lam
PRINT® Nanoparticle Manufacturing Scaleup for Pharmaceutical Applications
D.A. Schorzman
Characterization of an ultra high aspect ratio electron beam resist for nano-lithography
S. Lewis, D. Jeanmaire, V. Haynes, L. Piccirillo
Nanoscale Graphene Lithography Using an Atomic Force Microscope
K. Kumar, E.H. Yang
Measurement of Figure of Merit for a Single β-Silicon Carbide Nanowire by the Four-Point Three-ω Method
T.Y. Choi
Preparation of nanopatterned substrates via Dip-pen Nanolithography for stem cell applications
S. Oberhansl, A. Lagunas, E. Martinez, H. Jamil, J. Samitier
Photonic Curing of Silver Nanoparticle Based Inks Deposited by M3D
J. West, M. Carter, S. Smith, J. Sears
Silicon Nanostructure Fabrication by Direct FIB Writing and TMAH Wet Chemical Etching
P. Sievilä, N. Chekurov, I. Tittonen
Point-Mass Model for Nano-Patterning Using Dip-Pen Nanolithography (DPN)
S.-W. Kang, D. Banerjee
Fabrication of Micro Photonic Crystals for Handling of Terahertz Electromagnetic Waves
S. Kirihara, D. Sano, T. Niki, N. Ohta, Y. Takinami
Functional lipid nanostructures fabricated by dip-pen nanolithography
S. Lenhert
Measurement of DPN-Ink Viscosity using an AFM Cantilever
S. Biswas, M. Hirtz, S. Lenhert, H. Fuchs
The Challenges Facing Open Access Nanofabrication Facilities
R. Hicks
Intermittent desolvation method to prepare size-controlled BSA nanoparticle
S-Y-R Paik, H.H. Nguyen, S.C. Yang, J. Che, S. Ko
In-situ Growth of Gold Nanoparticles Conductive Layer on Plastic Film as an Integrated Lead Ions Sensor
X. Zhang, C.G. Hu, S.S. Hu
Alkoxide-based precursors for direct drawing of metal oxide micro- and nanofibres
T. Tätte, M. Hussainov, G. Kelp, R. Rand, J. Gurauskis, A. Lõhmus
Fabrication of pyramid array nanostructure on gallium nitride
C-C Hsieh, W-C Ke, N-P Chen, W-J Lin, Y-C Cheng, T-C Li, J-C Lin
Fabrication of biodegradable zein films by using soft lithography
B. Altunakar, J.L. Kokini
Deposition of Interwoven Fibrous Nanostructure using Ultrafast Laser Ablation in Ambient Condition
A. Tavangar, B. Tan, K. Venkatakrishan
VDK 4000 Direct Write System: A new approach to direct write technology
M. Theodore, J. Fielding, J. Royer, V. Kalanovic, J. Nirilovic, J. Sears
Development of Nitrogen modified TiO2 and activated carbon fiber composites in single step
C.-Y. Tsai, H.-C. Hsi, K.-S. Fan
Development of Precision Stage with Magnified Displacement System
J.G. Kim, S.C. Choi, D.W. Lee
MEMS Fab: Design, Manufacture, Instrumentation
Influence of resist composition on demolding force in UV nanoimprint lithography
A. Amirsadeghi, J. Lee, S. Park
Maskless Lithography Using Patterned Amorphous Silicon Layer Induced by Femtosecond Laser Irradiation
A. Kiani, K. Venkatakrishnan, B. Tan
Micro Crumples for Self-Assembly of Field Emission Devices
S. Sambandan
Monolithic CMOS MEMS technology development: A piezoresistive-sensors case study
A. Chaehoi, D. Weiland, D. O’Connell, S. Bruckshaw, S. Ray, M. Begbie
Practical issues with ion beam milling in acoustic resonator technologies
S. Mishin, Y. Oshmyansky, F. Bi
Investigation on correlation between cold/hot weld line mechanical properties and micro injection molding processing parameters
L. Xie, D. Zhu, G. Ziegmann, L. Steuernagel
Machining Using Fast Tool Servo Combined with Ultrasonic Vibrator
S.C. Choi, Lu Hong, D.W. Lee
MEMS and NEMS Devices
Micromachined Glass-Blown 3-D Spherical Shells as Mechanical Vibratory Elements
I.P. Prikhodko, A.A. Trusov, S.A. Zotov, A.M. Shkel
Carbon-based Nanoelectronic Devices for Space Applications
A.B. Kaul, A.R. Khan, K.G. Megerian, P. von Allmen, L. Bagge, L. Epp, R.L. Baron
Modeling of a Surface Acoustic Wave Strain Sensor
W.C. Wilson, G.M. Atkinson
Frequency-Interleaved MEMS Ultrasound Transducer
S-J Chen, Y. Choe, E.S. Kim
High Fidelit Loud Microspeaker Based on PZT Bimorph Diaphragm
Y. Choe, S.J. Chen, E.S. Kim
Mechanical Robustness of FPA in a-Si Microbolometer with Fine Pitch
H.Y. Kim, K.M. Kim, B.I. Kim, W.S. Jang, T.H. Kim, T.Y. Kang
Arrayed, Piezoelectrically-Actuated Mirrors and Gratings for Spectrometer
S-J Chen, D. Chi, J. Lo, E.S. Kim
A MEMS-Based Wide-Band Multi-State Power Attenuator for Radio Frequency and Microwave Applications
J. Iannacci, A. Faes, F. Mastri, D. Masotti, V. Rizzoli
Design of compact, high capacitance ratio MEMS switch for X - Band applications using high-k dielectric materials
K. Maninder
One-chip MOS Structure for Temperature Flow Sensor
M. Husak, A. Boura, J. Jakovenko
Gentle Micropump based on Microelectromagnetic Actuator
A.T. Al-Halhouli, A. Waldschik, M.I. Kilani, S. Büttgenbach
Investigation of Stress in AlN Thin Films for Piezoelectric MEMS
R.E. Sah, L. Kirste, M. Baeumler, P. Hiesinger, V. Cimalla, V. Lebedev, H. Baumann
Preparation of functional PZT films on 6" and 8" silicon wafers by high rate sputtering
R. Dudde, D. Kaden, H.-J. Quenzer, B. Wagner
Design and Control of a Zero Voltage Switching MEMS DC-DC Power Converter
S. Ghandour, G. Despesse, S. Basrour
A current controlled plasma-on-a-chip for atmospheric plasma generation
H. Park, J. Jeong, Y. Kim
Development of Surface-micromachined Binary Logic Gate for Low Frequncy Signal Processing in MEMS based Sensor Applications
S. Chakraborty, T.K. Bhattacharyya
Using MEMS as Self-Calibrating Force-Displacement Transducers: A Computational Study
J.V. Clark, F. Li, H. Lee, K. Kadasia
Towards Microrobots with Insect-Like Dexterity
J.V. Clark, F. Li, J.V. Clark
Nanolab System for Nanoelectronics and Sensors
A. Dimonte, D. Demarchi, P. Civera, G. Piccinini
Triaxial Accelerometer for Placement Inside the Ear Canal
T. Kwa, G. Pender, J. Letterneau
Individually addressable Cantilever Arrays for Parallel Atomic Force Microscopy
T. Sulzbach, W. Engl, R. Maier
Flexible Micropost Arrays For Studying Traction Forces Of Vascular Smooth Muscle Cells
Q. Cheng, Z. Sun, G.A. Meininger, M. Almasri
A Fully Symmetric and Completly Decoupled MEMS-SOI Gyroscope
A. Sharaf, S. Sedky, M. Serry, A. Elshurafa, M. Ashour, S.E.-D. Habib
Nano-porous poly-silicon gated ion selective field effect transistors
N. Zehfroosh, M. Shahmohammdi, S. Mohajerzadeh
Design and Fabrication of the Sensor for Measuring the Human Bladder Volume
S. Lee, S. Jun, S. Kim, S. Kim, B. Choi
Sensing Systems and Wireless Networks
Innovative Gas Sensors for Sub-ppm Detection of Organophosphorus Nerve Agents by Chemically Functionalized Carbon Nanotube Field-Effect Transistors
A. Carella, L. Caillier, S. Clavaguera, C. Celle, J-P Simonato
Wireless SensorSystem with Bidirectional Communications
M. Husak, A. Boura, J. Jakovenko
Development of Quantitative Adhesive Force Measurement Systems for Flexible Electronics
M. Kim, J. Park, B. Choi
Simple vertical velocity measurement system for different use
M. Husak, J. Jakovenko
Modelling of Low Level Ionic Current Sensing Micro-tip
S. Memon, W. Balachandran
Digital signal processing post-hybridization of DNA Biosensor
S.A. Afuwape
Mobility Effects on WCDMA Receivers in Indoor Areas
S. Alhloul, F. Ahmad Alzahrani
Micro and Nano Fluidics
Slip boundary conditions in nanofluidics from the molecular theory of solvation
A.E. Kobryn, A. Kovalenko
Experimental Study of Drying/Evaporation in an Effective 2D Porous Medium
A.G. Yiotis, I.N. Tsimpanogiannis, A.K. Stubos
Continuous Separation of Non-Magnetic Particles through Negative Magnetophoresis inside Ferrofluids
T. Zhu, F. Marrero, L. Mao
Vapor-assisted bonding of poly(dimethylsiloxane) and silicon-based substrates
A.Y.N. Sofla, C. Martin
Transitions Between Epithelial and Mesenchymal States in Microfluidic Platform: Acquisition of Malignant and Stem Cell Traits
A.R. Aref, R.Y.J. Huang, W. Kang, S.W. Jing, J.P. Thiery, R.D. Kamm
Design of a normally closed piezoelectric micro valve
S. Zähringer, M. Menacher, P. Kirchner, N. Schwesinger
Biomolecular Adsorption Phenomena in Electrowetting-Based Digital Microfluidic Devices
A. Ahmadi, K.D. Devlin, H. Najjaran, J.F. Holzman, M. Hoorfar
Novel Parameters for Rapid Blood Separation on a Centrifugal Platform
R. Gorkin, T.H. Kim, M. Madou, Y.K. Cho
Multiplexed Localization in Bi-Layer Digital Microfluidic Systems
M. Abolhasani, K.D. Devlin, H. Najjaran, M. Hoorfar, J.F. Holzman
The Investigation of Electrostatic Induced Inkjet Printing System for the Ejection of a Stable Micro/Nano Droplet
J. Choi, Y-J Kim, S.U. Son, K. Chul An, S. Lee
Nanofluidic Channel Based Single Molecular Sensors in Polymer Substrate Fabricated by Novel Nanoimprinting Processes
J. Wu, R. Chantiwas, S.C. Soper, S. Park
Toward reliable synthesis of radiotracers for positron emission tomography in PDMS microfluidic chips: Study and optimization of the [18F] fluoride drying process
W-Y Tseng
Droplet actuation in PPy redox process
Y-T Tsai, C-H Choi, E-H Yang
Optimized Surface Patterning Tools for Sub-attoliter Volume Fluid Deposition
M.L. Adams
Novel ultra-fine hollow needles formed on Silicon membranes
Z. Sanaee, S. Mohajerzadeh
Innovative Strobe-Based Drop Analysis Equipment for Non-Contact Dispensing Systems
Y. Kipman
Analysis of prediction capability for internal micro-channels fabrication in polycarbonate and PMMA
S.M. Karazi, D. Brabazon
Effect of laser processing parameters and glass type on topology of micro-channels
A. Ben Azouz, D. Brabazon, M. Vázquez, M. Macka
Study of the phenomenon of meniscus deformation and ejection by pulse voltage and frequency in drop-on-demand EHD printing
S. Son, K. An, Y-J Kim, J. Choi, S. Lee
Visual Motion Analysis of Nanoplatforms Flow under an External Magnetic Field
A. Nakhmani, L. Etgar, A. Tannenbaum, E. Lifshitz, R. Tannenbaum
Applied Systems and Synthetic Biology in Micro-Fluidic Biochips
B.J. Zeng
A Finite Element Analysis for a Supercritical Particulate Process
Y. Bakhbakhi
Inkjet Design, Materials and Fabrication
Manipulating Optical Properties of Luminescent Nanoparticle Substrates through Inkjet Printing
K. Guzan, J. Sumerel, L. Davis, P. Hoertz, K. Mills, D. Magnus-Aryitey
Modeling Drop Generation at the Microscale
M.S. Hanchak, E.P. Furlani
Drop Formation and Control of Non-Newtonian Fluid
J. Gao, K. Ng
Printed sensor and liquid actuation on natural fiber based substrate
J.J. Saarinen, P. Ihalainen, A. Määttänen, R. Bollström, J. Peltonen
Rapid Metallization of Silver and Copper Nano Inks by Surface Wave Plasma Sintering
J.M. Cho, Y.I. Lee, Y.A. Song, T.H. Kim, S.E. Kim, D.H. Kim
Ink-jet printed ZnO Nanoparticle Thin Films for Sensing Applications
S. Hartner, A.S.G. Khalil, M. Ali, M. Winterer, H. Wiggers
Stable colloidal dispersion of luminescing silicon nanoparticles for inkjet printing
A. Gupta, A.S.G. Khalil, M. Winterer, H. Wiggers
Inkjet Printed Devices for Armament Applications
J.L. Zunino III, D.P. Schmidt, A.M. Petrock, B.E. Fuchs
Machine Vision System for Analysis of Drops-in-flight and Wetting Visualization
Y. Kipman
Nano-Patterning of NaCl Using Nanopipette based on the QTF-AFM System
S.M. An, M. Geol W.H. Jhe
Customer-focused batch production via printing technology
A. Kain, C. Mueller, H. Reinecke
Computational Methods, Simulation and Software Tools
Effect of Electronic and Optical Properties of Quantum Dots on Hydrogenation
M. Ahmed
Electron transition energies of single-walled carbon nanotubes: Hartree – Fock’s CNDOL approaches for describing excitations and related properties
A.L. Montero, M.E. Fuentes, E. Menéndez, W. Orellana, C. Bunge, L.A. Montero, J.M. García de la Vega
MD boundary conditions for pressure gradient flows: nano-mixing, and nano-droplet deformation in extensional flows
M.K. Borg, W. Nicholls, J.M. Reese
Novel first-principle simulations of 3D atomistic structure
D. Zhang, E. Polizzi
Designing universal oligonucleotides for DNA/nanoparticle conjugates
G. Ivan, V. Grolmusz
A Sparse Grid based Collocation Method for Model Order Reduction of Finite Element Models of MEMS under Uncertainty
P.S. Sumant, H. Wu, A.C. Cangellaris, N. Aluru
Calibration and Validation Procedure for Reliable and Predictive High-level Transducer Models Suited for System-level Design
R. Khalilyulin, G. Schrag, G. Wachutka
An Online Electrostatics Modeling Tool for Microdevices with Dirichlet Boundary Conditions by Schwarz-Christoffel Mapping
F. Li, J.V. Clark
Dynamic Compact Thermal Model of an Electrothermal Micromirror Based on Transmission Line Theory
S. Pal, H. Xie
Passive Temperature-Compensation of MEM Resonators
X. Rottenberg, R. Jansen, S. Stoffels, J. De Coster, W. De Raedt, H.A.C. Tilmans
Improved Modeling of the Comb Drive Levitation Effect
F. Li, J.V. Clark
Finite Element Modeling and Analysis of CMOS-SAW Sensors
O. Tigli, M.E. Zaghloul
Modeling study of capacitance and gate current in strained High--K Metal gate technology: impact of Si/SiO2/HK interfacial layer and band structure model
D. Garetto, D. Rideau, E. Dornel, W.F. Clark, C. Tavernier, Y. Leblebici, A. Schmid, H. Jaouen
Polymer Simulation in a Microfluidic Entropic Trap
B. Kallemov, D. Trebotich, G.H. Miller
Computer Simulations of CrO2 as a Spin Polarized Material for Spintronics
R. Kaur, G. Mallia, K.A. Yates, N.M. Harrison
Comparing the Effect of 2nd Row Dopants on the Carbon Support to improve Pt Catalytic Activity and Durability
M.N. Groves, A.S.W. Chan, C. Malardier-Jugroot, M. Jugroot
Simulation and Experiment on 2PC Transmitted Diffraction Grating for GaN LEDs
X. Jin
A Molecular Dynamics Modeling on Cantilevered Triple-Walled Carbon Nanotube Resonators
J.H. Lee, O.K. Kwon, J.W. Kang, H.J. Hwang
Computed Metallofullerene Yields in the X@C74 and Z@C82 Series
Z. Slanina, F. Uhlik, T. Akasaka, S. Nagase
Monte Carlo Studies of the Effect of Temperature, Si/Al, and Metal Loading on the Templated Synthesis of Pt Nanowires in MOR-type Zeolites
J.A. Huertas-Miranda, M.M. Martínez-Iñesta
Ozonolysis of Indigo: A ab initio study
E. Ortiz, H.E. Solís Correa, V. Uc
The concept of a representative atomic volume for a grain
A. Gubanov, O. Vinogradov
Hybrid molecular dynamics and Navier-Stokes method in complex nanoflow geometries
M.K. Borg, W. Nicholls, J.M. Reese
The Simplest Model of Multisite Adsorption of Molecules with Different Orientation in Adlayer
V.F. Fefelov, V.A. Gorbunov, A.V. Myshlyavtsev, M.D. Myshlyavtseva
Simulation of Self-Assemblig Monolayers of Complicated Organic Molecules at the Interface
V.F. Fefelov, V.A. Gorbunov, A.V. Myshlyavtsev, M.D. Myshlyavtseva
Application of Computational Chemistry to Nanotechnological Problems
S. Gusarov, A. Kovalenko
Designing nanomaterials mechanical properties from the observable nanostructure features
T.B. Tengen
3D Molecular Theory of Solvation for Nanochemistry in Solution
A. Kovalenko
Development of Device-Level Chemical-Mechanical Polishing Simulation Module Using Cellular Automata Method
H.-M. Yeh, K.-S. Chen
A visual approach on MEMS process modeling using device cross-sections
T. Schmidt, M. Mielke, K. Hahn, D. Ortloff, J. Popp, R. Brueck
Design Simulations of MEMS Micropump by 3D Fluid-Structure Interaction Analysis
J. Johari
Design and Fabrication of a Low Power Electro-thermal V-shape Actuator With Large Displacement
J. Khazaai
Analysis and Simulation of Curved Bimorph Microactuators
S. Pal, H. Xie
SugarCube: An Online Tool for Investigating the Performance of Ready-Made Parameterized MEMS
P. Marepalli, J.V. Clark
Simulation of Surface and Buffer Trapping Effects on Gate Lag in AlGaN/GaN HEMTs
K. Horio, A. Nakajima, K. Fujii
Analytical Potential Distribution Model for Underlap Double Gate MOSFETs with 3T-4T and Symmetric- Asymmetric Options for Subthreshold operation: A Conformal Mapping Approach
R. Vaddi, S. Dasgupta, R.P. Agarwal
Microwave and RF Applications of Gate Material Engineered Trapezoidal Recessed Channel (GME-TRC ) MOSFET
P. Malik, R. Chajaur, M. Gupta, R.S. Gupta
Linearity Performance Assessment of Nanoscale Gate Material Engineered Trapezoidal Recessed Channel (GME-TRC) MOSFET for RFIC design and Wireless application
P. Malik, R. Chaujar, M. Gupta, R.S. Gupta
Numerical Simulation on Nonlinear Response of Two-Dimensional Electron Plasmas in the Field Effect Transistor Structures
Z. Yan, J. Zhu, Y. Wang, X. Lin, J. He
Nonresonant Response Characteristics to Terahertz Radiation of FETs: Influence of Magnetic Field
J. Zhu, Z. Yan, Y. Wang, X. Lin, J. He
Analytic Modeling of BioFET as a pH Sensor
Y. Song, Y. Guan, J. Zhang, J. He, X. Zhang, X. Lin
Electrical Characteristics of 16-nm-Gate Multi-Gate-and-Multi-Fin Devices and Digital Circuits
H-W Cheng
Numerical Simulation on Nonlinear Response of Two-Dimensional Electron Plasmas in the Field Effect Transistor Structures
Z. Yan, J. Zhu, Y. Wang, X. Lin, J. He
Carboxylation of Boron- and Nitrogen-Doped Graphene and Carbon Nanotubes: First Principles Study
N. Al-Aqtash, I. Vasiliev
Molecular Dynamics Simulations of Flow over a Nano-cylinder in a Rectangular Nano-channel
A. Jabbarzadeh
Numerical simulation of binary droplet collision using CFD software tools
K.L. Pan, M.W. Liao
The challenges of statistical experiment design in process development
D. Ortloff, J. Popp
Nano Crystalline Cellulose – Optical and Structural Properties by Molecular Dynamic Simulations
Y. Kadiri, D. Simon, G. Picard, F. Ghozayel, J.-D. Lebreux
Compact Modeling
Theory of Bipolar MOSFET (BiFET) with Electrically Short Channels
B.B. Jie, C-T. Sah
Non-Charge-Sheet Analytic Model for Ideal Retrograde Doping MOSFETs
Z. Zhou, J. Zhang, X. Zhou, X. Lin, J. He
Impact of Gate-Induced-Drain-Leakage current modeling on circuit simulations in 45nm SOI technology and beyond
H. Wang, R. Williams, L. Wagner, J. Johnson, P. Hyde, S. Springer
Modeling of Gate Leakage, Floating Body Effect, and History Effect in 32nm HKMG PD-SOI CMOS
Y. Deng, R.A. Rupani, J. Johnson, S. Springer
A Unified Charge-Based Model for SOI MOSFETs Valid from Intrinsic to Heavily Doped Channel
J. Zhang, J. He, L. Zhang, X. Zhou, Z. Zhou
Subthreshold Quantum Ballistic Current and Quantum Threshold Voltage Modeling for Nanoscale FinFET
U. Monga, T.A. Fjeldly
Electrostatic Potential Compact Model for Symmetric and Asymmetric Lightly Doped DG-MOSFET Devices
H. Abebe, E. Cumberbatch, S. Uno, V. Tyree
Analytic Channel Potential Solution of Symmetric DG AMOSFETs
L. Chen, Y. Xu, L. Zhang, X. Zhou, W. Zhou, J. He
Source/Drain Edge Modeling for DG MOSFET Compact Model
T. Nakagawa, S. O’uchi, T. Sekigawa, T. Tsutsumi, M. Hioki, H. Koike
Xsim: Benchmark Tests for the Unified DG/GAA MOSFET Compact Model
X. Zhou, G.J. Zhu, M.K. Srikanth, S.H. Lin, Z.H. Chen, J.B. Zhang, C.Q. Wei, Y.F. Yan, R. Selvakumar
Analytical Modeling of the Subthreshold Electrostatics of Nanoscale GAA Square Gate MOSFETs
S.K. Vishvakarma, T.A. Fjeldly
A Continuous Compact Model of Short-Channel Effects for Undoped Cylindrical Gate-All-Around MOSFETs
B. Cousin, M. Reyboz, O. Rozeau, M.-A. Jaud, T. Ernst, J. Jomaah
Analytical Solution of Surface Potential for Un-Doped Surrounding-Gate MOSFET
A. Dey, A. DasGupta
Analytical model of quantum threshold voltage in short-channel nanowire MOSFET including band structure effects
J. Dura, S. Martinie, D. Munteanu, M.-A. Jaud, S. Barraud, J.L. Autran
Bias Dependence of Low Frequency Noise in 90nm CMOS
N. Mavredakis, A. Antonopoulos, M. Bucher
Compact Modeling of Signal Transients for Dispersionless Interconnects With Resistive, Capacitive and Inductive Terminal Loads
C. Liu, Z. Zhou, X. Lin, J. Xia, X. Zhang, J. He
Improved Compact Model of Quantum Sub-band Energy Levels for MOSFET Device Application
W. Feldman, E. Cumberbatch, H. Abebe
Modeling of Mismatch and Across-Chip Variations in Compact Device Models
N. Lu
Guidelines for Verilog-A Compact Model Coding
G. Depeyrot, F. Poullet
Index of Authors
Index of Keywords
Nanoscience and Technology Inst., Cambridge, Massachusetts,
 |
Ask a Question About this Product More... |
|
