Add 2 SuperSpeed USB 3.0 ports with SATA power to your PCI express-enabled PC. The PEXUSB3S24 2-Port PCI Express USB 3.0 card lets you add two USB 3.0 ports to your PCI express-enabled computer system, with an optional SATA power connector to connect to your system power supply and deliver up to 900mA of power per port to USB 3.0 bus-powered devices (500mA for USB 2.0). enhanced with UASP support (USB attached SCSI Protocol), this USB 3.0 controller performs up to 70% faster than conventional USB 3.0 when paired with a UASP supported enclosure (Note: UASP is not supported by all operating systems). using a more efficient Protocol than the traditional USB bot (bulk-only transport), UASP technology optimises transfers by allowing multiple commands to be processed simultaneously, significantly increasing transfer speeds for less wait time on data transfers. The PCIe USB 3.0 adapter is compliant with USB 3.0 standards for data transfer speeds up to 5 Gbps, while still offering backward compatibility with existing USB 2.0 / 1.1 devices. For added versatility, the controller card is equipped with a standard profile bracket and includes a low-profile/half-height bracket for installation in small form-factor computers. Uasp is supported in Windows 8, 8.1, server 2012 and Linux kernel 2.6.37 or LATER. In testing UASP performed with up to a 70% faster read / 40% faster write speed over traditional USB 3.0 at peak performance. At the same peak in testing, UASP also showed up to an 80% reduction in required processor resources. Test results were obtained using an Intel Ivy Bridge system, Startech.Com add-on USB 3.0 cards, a UASP-enabled Startech.Com enclosure, and a SATA III solid state drive.